Glowtec UK - Daytime Coloured Glow-in-the-Dark UV Paint.

STARGLOW DAY-GLOW PAINTS

Click here to find out more about Starglow Paints

Extra-Thick 'Smart' Paint for Mural & Stencil Work

	Daytime Coloured Acrylic Paint
	Glows-in-the-Dark
	UV Responsive / Reactive
	ECO Friendly & Non-Toxic
	*Suitable for Indoor & Outdoor use*
	Made in the UK

Manufactured using our range of next-generation Starglow Day-Glow powders. Starglow Paints are safe water-based acrylic coatings that are coloured in daylight, and (depending on the colour) will glow in the dark for hours.

Starglow paints may be used on a wide range of surfaces providing they are pre-painted (or primed) white and clean and free from dirt oil and grease.

Starglow Paints can be applied by Brush, Roller or Spray.

Suitable for use on most surfaces....

Wood
Metal
Plastic
Paper/Card
Most Fabrics
Masonry

These highly adaptable coatings have traditional been used mainly in safety applications, but as people have become more craft orientated and resourceful, Starglow paints are now being used for many new and innovative applications, for example:

The ideal paint for ...

	Wall Murals
	*Stencils*
	Innovative Artwork

Click on a bottle below for more information

Basic guidelines for using Starglow Paints.

•	As glow-pigments will tend to settle after a while you should stir the paint well before each use.
•	Use a white, or a light colour as the background for the best results. Any colour other than white will diminish the glow.
•	Try to build-up thin layers of glow paint to create one thick layer. Generally speaking, The thicker the layer of Glow paint, the longer and brighter the afterglow.
•	Leave each layer 30-60 minutes to dry before a re-coating.
•	Do not over-dilute or 'thin' the glow-paint too much as this will impair its performance.
•	If you are using outdoors you do not need to protect your coating, However if it will be exposed to hand or foot contact, you should apply one or two coats of Starglow top-coat sealer.
•	For your paint / artwork to be 'daytime invisible', it should be applied to a white / light surface, as the paint itself also appears white in normal light.

These are just guidelines and the user should use their best judgement in working with the paints.

STARGLOW. Smart Paints for Smart Artists.

Coverage

30ml pot of Starglow Paint will cover an area approximately the size of an A4 piece of paper.

A 60ml pot of Starglow Paint will cover an area approximately the size of an A3 piece of paper.

A 120ml pot of Starglow Paint will cover an area approximately the size of an A2 piece of paper.

A 240ml pot of Starglow Paint will cover an area approximately 1 Square meter

For larger quantities

A 500ml pot of Starglow Paint will cover an area approximately 2 Square meters

A 1lt pot of Starglow Paint will cover an area approximately 4 Square meters

First Aid

May cause irritation of nose, throat, eyes & skin. Wash with soap and water when your skin or eyes are exposed to our products. Keep the products away from moisture and seal it when not in use. If swallowed do not induce vomiting. Seek medical attention.

Important Note

Before adopting commercially, prospective users of our products are advised to firstly purchase a sample in order to fully evaluate the product’s suitability for purpose.

Children should be supervised when using this product.

Wood

Metal

Plastic

Paper/Card

Most Fabrics

Masonry